⦿ Conforming to BS 336, IS 902
⦿ Working pressure : 150 PSI /10.5 Kg/cm2
⦿ Test pressure : 325 PSI / 22.5 Kg/cm2
⦿ Size : 2 1/2” ( 63 mm) as per BS 336 / IS 903
⦿ Working pressure : 150 PSI /10.5 Kg/cm
2
⦿Test pressure : 325 PSI / 22.5 Kg/cm
⦿ Outlets : 2 ½” ( 63 mm) as per BS 336 / IS 903
⦿ Working pressure : 150 PSI /10.5 Kg/cm
2
⦿Test pressure : 325 PSI /22.5 Kg/cm
⦿ Size : 2 ½” ( 63 mm) / 1 ½”(38 mm)
⦿ Working pressure : 150 PSI /10.5 Kg/cm
⦿ Test pressure : 325 PSI / 22.5 Kg/cm2
⦿ Made in Gunmetal flanged inlet as per ANSI
⦿ Made in Gunmetal flanged inlet as per PN16
⦿ Made in Gunmetal BSP female threaded inlet
⦿ Body : Carbon steel fabricated
⦿ Inlet : 4” NB flanged
⦿ Working pressure : 150 PSI / 10.5 Kg/cm
2
⦿ Test pressure : 325 PSI / 22.5 Kg/cm
⦿ Body : Carbon steel
⦿ Inlet : 6” NB flanged
⦿Working pressure : 150 PSI /10.5 Kg/cm
2
⦿Test pressure : 325 PSI / 22.5 Kg/cm2
⦿ Body : Carbon steel
⦿ Inlet : 6” NB Flanged
⦿ Working pressure : 150 PSI / 10.5 Kg/cm
2
⦿ Test pressure : 325 PSI / 22.5 Kg/cm
⦿ Outlet : 4” NB flanged
⦿ Working Pressure : 150 PSI / 10.5 Kg/cm
2
⦿Test Pressure : 325 PSI / 22.5 Kg/cm
⦿ Outlet : 6” NB flanged
⦿ Working Pressure : 150 PSI / 10.5 Kg/cm
2
⦿ Test Pressure : 325 PSI / 22.5 Kg/cm
⦿ Outlet : 6” NB flanged
⦿ Working Pressure : 150 PSI / 10.5 Kg/cm
2
⦿ Test Pressure : 325 PSI / 22.5 Kg/cm2
⦿ Body : Copper alloy Inlet Connection : Threaded male
⦿ Max. working pressure : 150 PSI / 10.5 Kg/cm
2
⦿ Hydro testing pressure : 350 PSI / 22.5 Kg/cm2
⦿ Size : 1 ½”& 2 ½”
⦿ Jet Spray Type
⦿ Serrated end for hose fitting
2
⦿ 6 GPM @100 PSI / 24 LPM @ 7 Kg/cm2
⦿ Fixed / Swinging type
⦿ Side plate powder coated finish red
⦿ Threaded Inlet connection
⦿ High pressure braided rubber hose as per IS 444 Type II / PVC / Thermoplastic as per IS 12585
⦿ 225 Liter foam tank
⦿ vInline inductor 0 to 6% & Jet-Spray nozzle
⦿ 1 ½” X 30 mtr high pressure rubber braided
⦿ H x W x D: 24” X 24” X 10”
⦿ Lightweight & weatherproof
⦿ Wall mounted / self standing
⦿ H x W x D: 24” X 30” X 10”
⦿ Lightweight & weatherproof
⦿ Wall mounted / self standing
⦿ H x W x D: 24” X 30” X 10”
⦿ Lightweight & weatherproof
⦿ UV resistant
⦿ Bearing IS 903 mark
⦿ Inlet Connection : 2 ½” Male instantaneous
⦿ Outlet : Solid jet nozzle
⦿ Operating Pressure : 150 PSI Max. / 10.5 Kg/cm2
⦿ Finish : Natural polished
⦿ IS 8442
⦿ Standpost mounted
⦿ Carbon steel water ways
⦿ Hot dip galvanised
⦿ Bronze swivel joint with S.S ball bearings
⦿ Flanged inlet
⦿ Standpost mounted type
⦿ Horizontal 360 & vertical +90 & -45 rotation
⦿ Hand-wheel for rotation of swivel joint
⦿ Bronze geared swivel joint with self locking
⦿ Can be used with jet nozzle or jet spray nozzle
DIFR Tested & TAC Approved
Synthetic polyvalent foam forming liquid, pseudo-plastic consisting of surface
active substances and polymer additives
Having good resistance to contamination of hydrocarbons and to
dehydration of polar solvents
⦿ IS 6026
⦿ Cradle mounted
⦿ Made from Aluminium alloy
⦿ Range : 1.6 Km
⦿ Available in horizontal and vertical mounted
⦿ Made from Aluminium alloy
⦿ 12VDC or 24VDC or 200 V or 440VAC operated
⦿ Audiable range in KM is 0.10 to 16
⦿ Suitable for use in indoor & outdoor areas
⦿ Strong metallic body with rubber edge protector
⦿ Built in switchable siren function
Dive into a sustainable future with our cutting-edge water waste treatment solutions – where innovation meets environmental responsibility. Unleash the power of cleaner, greener tomorrow with our expert services today.
